1.

C. G. Go, H. T. Go and C. I. Lin, “ Particle Swarm Simulation of Escape Movement in Panic Situation for the Evacuation Design ,” Advanced Science Letters, no. 9, pp. 74-79, 04 2012.

2.

Chung-Huan Sui, Cheer Germ Go, Ming-Hsiang Shih and Wen-Pei Sung, “Differentia of the Displacement Dependent Semi-Active Hydraulic Damper and Friction Damper in the Energy Dissipation in Structure Vibration,” Advanced Science Letters, no. 8, pp. 268-273, 03 2012.

3.

Cheer-Germ Go, Jun-Ren Tang, Jen-Hao Chi, Cheng-Tung Chen, Yue-Lin Huang, “Fire-resistance property of reinforced lightweight aggregate concrete wall,” Construction & Building Materials, no. 30, pp. 725-733, 01 2012. (SCI)

4.

Cheer Germ Go, Sung-Shun Peng, Ming-Hsiang Shih and Tzen-Chin Lee, “Digital-image-correlation to the evaluation of the confidence range of cleavage strength of concrete,” Advanced Science Letters, pp. 1430-0433, 04 2011. (SCI)

5.

C. H. Sui, C. G. Go, M. H. Shih, and W. P. Sung , “Validity of the Displacement Dependent Semi-active Hydraulic Damper Used in a Structure,” Journal of vibration and control, vol. 4, no. 17, pp. 579-587, 04 2011. (EI、SCI)

6.

C. G. Go, C. H. Sui, M. H. Shih, and W. P. Sung, “A Linearization Model for the Displacement Dependent Semi-active Hydraulic Damper,” Journal of vibration and control, vol. 14, no. 16, pp. 2195-2214, 01 2010. (EI、SCI)

7.

Sung Wen-Pei , Go Cheer Germ and Shih Ming-Hsiang, “Finite Element Modeling for the Analysis of Cracked Cylindrical Pipes,” Journal of Zhejiang University Science, vol. 9, no. 8, pp. 1373-1379, 08 2007. (EI、SCI)

8.

Ming-Hsiang Shih, Cheng-I Lin, Wen-Pei Sung, and Cheer Germ Go, “Numerical Analysis for the Energy Reduction Behavior of Accumulated Semi-active Hydraulic Damper,” Journal of Dynamical Systems & Geometric Theories , vol. 1, no. 4, pp. 29-45, 05 2006. (EI)

9.

Ming-Hsiang Shih, Wen-Pei Sung and Cheer Germ Go, “Development and Seismic Reduction Performance of Velocity and Displacement Dependent Hydraulic Damper,” Experimental Techniques, vol. 3, no. 30, pp. 41-45, 05 2006. (EI、SCI)

10.

Wen-Pei Sung, Ming-Hsiang Shih, Cheng-I Lin and Cheer Germ Go, “ The Critical Loading for Lateral Buckling of Continuous Welded Rail,” Journal of Zhejiang University Science, vol. 8, no. 6A, pp. 878-885, 08 2005. (EI、SCI)

11.

Ming-Hsiang Shih, Wen-Pei Sung and Cheer Germ Go , “The Use of Low Yielding Steel in a New Energy Absorber,” Experimental Techniques, no. 29, pp. 20-24, 03 2005. (EI、SCI)

12.

Wen-Pei Sung, Cheng-I Lin, Ming-Hsiang Shih and Cheer Germ Go, “Analysis Modeling for Plate Buckling Load of Vibration Test,” Journal of Zhejiang University Science , vol. 2, no. 6A, pp. 132-140, 02 2005. (EI、SCI)

13.

Ming-Hsiang Shih, Wen-Pei Sung and Cheer Germ Go, “The Investigation of Newly Developed Added Damping and Stiffness Device With Low Yield Strength Steel,” Journal of Zhejiang University Science, vol. 3, no. 15, pp. 326-334 , 03 2004. (EI、SCI)

14.

C. G. Go and C. D. Liou, “Load-Response Determination for Imperfect Column Using Vibratory Data,” Journal of Sound and Vibration, vol. 3-5, no. 269, pp. 455-466 , 01 2004. (EI、SCI)

15.

郭其珍，陳添偉, “催眠學理在勞工安全衛生訓練之應用,” 勞工安全衛生簡訊, no. 62, pp. 10-11, 12 2003.

16.

Cheng I Lin, Wen-Pei Sung and Ming-Hsiang Shih, May and Cheer Germ Go, “ Analysis of Bearing Capability of Anchor Bolt Embedding in Concrete,” J. of CCIT, vol. 2, no. 31, 05 2003. (EI)

17.

Shih, M. H., Sung, W. P. and Go, C. G, “ A Design Concept with a Displacement Dependent Semi-Active Hydraulic Damper for Energy Dissipation ,” Experimental Techniques, vol. 6, no. 27, 2003. (EI、SCI)

18.

Wen-Pei Sung, Kuen-Suan Chen and Cheer Germ Go, “Analytical Method of Process Capability for Steel,” , Vol.20, No.7, P. . (SCI, EI) ,” International Journal of Advanced Manufacturing Technology, vol. 7, no. 20, pp. 480-486, 10 2002. (EI、JCR)

19.

M. H. Shih, W. P. Sung and C. G. Go , “Development of Accumulated Semi-Active Hydraulic Damper,” Experimental Techniques, vol. 5, no. 26, pp. .29-32, 09 2002. (EI、SCI)

20.

Wen-Pei Sung, Ming-Hsiang Shih and Cheer Germ Go , “Analysis Modeling for the Sequence of Local Buckling of Crack Thin Plate Under Tension,” J. of CCIT, vol. 2, no. 30, pp. 60-72, 05 2002. (EI)

21.

Cheer Germ Go, Wen-Pei Sung, Kuen-Suan Chen, “Design Coefficient for Wooden Shoring System,” Journal of Asian Arch. & Building Engineering, vol. 1, no. 1, pp. 1-5, 03 2002.

22.

Wen-Pei Sung, Kuan-Suan Chen and Cheer Germ Go , “The Effective Method of Evaluation for the Quality Control of Steel Reinforcing Bar,” Advances and Applications in Statistics, vol. 2, no. 1, pp. 175-193, 04 2001.

23.

C. G. Go and C. D. Liou, “Experimental determination of the buckling load of a flat plate by the use of dynamic parameters,” Structural Engineering and Mechanics, vol. 5, no. 9, pp. 483~491, 05 2000. (EI、SCI)

24.

T. Z. Lee and C. G. Go, “Graphical Technique for the Flutter Analysis of Flexible Bridge,” Wind & Structure an International Journal, vol. 1, no. 2, pp. 41-49, 03 1999. (EI、SCI)

25.

C. G. Go, C. I Lin, Y. S. Lin and S. H. Wu, “Formulation of a Super-Element for the Dynamic Problem of a Cracked Plate,” Communications in Numerical Methods in Engineering, no. 14, pp. 1143-1154, 05 1998. (EI、JCR)

26.

C. G. Go, Y. S. Lin and E. H. Khor , “Experimental Determination of the Buckling Load of a Straight Structural Member by Using Dynamic Parameters ,” Journal of Sound and Vibration, vol. 3, no. 205, pp. 257-264, 08 1997. (EI、SCI)

27.

C. G. Go, Y. S. Lin and E. H. Khor, “Displacement Bound of Beam Column with Time Dependent Boundary Constraints,” JCIE, vol. 4, no. 18, pp. 583-589, 07 1995. (EI、SCI)

28.

C. G. Go and Y. S. Lin, “Infinitely Small Element for the Dynamic Problem of a Cracked Beam,” Engineering Fracture Mechanics, vol. 4, no. 48, pp. 475-482, 04 1994. (EI、SCI)

29.

郭其珍, “營建支撐系統挫屈失敗檢測分析,” 勞工安全衛生研究季刊, vol. 1, no. 1, 06 1993.

30.

郭其珍, “台灣地區營建作業安全設施調查研究,” 勞工安全衛生研究季刊, vol. 3, no. 1, 01 1993.

31.

C. G. Go and G. C. Chen, “On the Use of an Infinitely Small Element for the Three Dimensional Problem of Stress Singularity,” International Journal of Computers and Structures, vol. 1, no. 45, pp. 25-30, 09 1992. (EI、SCI)

32.

C. G. Go and Y. S. Lin, “Infinitely Small Element for the Problem of Stress Singularity,” International Journal of Computers and Structures, vol. 1, no. 45, pp. 25-30, 1990. (EI、SCI)

33.

郭其珍,鄭紹祥, “初值法於板平面應力之分析,” 結構工程, vol. 3, no. 4, 09 1989.

34.

C. G. Go and S. E. Swartz, “Energy Method for Fracture Toughness Determination in Concrete,” Experimental Mechanics, Journal of SEM, pp. 292-296, 09 1986. (EI、SCI)

35.

郭其珍,陳金在, “應變計計測破裂強度,” 檢測技術, vol. 3, no. 4, pp. 1-4, 04 1986.

36.

S. E. Swartz and C. G. Go, “Validity of Compliance Calibration to Cracked Concrete Beams in Bending,” Experimental Mechanics, pp. 129-134, 06 1984. (EI、SCI)

37.

R. L. Gillespie, C. G. Go and S. E. Swartz, “Vertical Displacement Gage Fixture for JIC Testing,” Experimental Techniques, pp. 32-33, 05 1984. (EI、SCI)

38.

C. G. Go, S. E. Swartz and K. K. Hu, “Stress Intensity Factors for Single-Edge-Notch Beam,” Journal of Engineering Mechanics, ASCE, vol. 4, no. 110, pp. 629-632, 04 1984. (EI、SCI)