1.

黃尊宏、呂東苗 (2012/12), “AISC鋼柱之彈性與非彈性分析- ASD and LRFD,” 鋼結構工程，中華民國鋼結構協會 (Under reviewing), no. 48, 12 2012.

2.

高碩亨、呂東苗 (2012/09), “鋼骨梁-柱構件之檢驗-AISC有效長度法與直接分析法,” 鋼結構工程，中華民國鋼結構協會, vol. 47, pp. 34-49, 09 2012.

3.

Wei T. Hsu, Dung M. Lue, and Y. Frank Chen (2012/09), “Design Aid for Moment Strength of Built-up Crane Runway Girders,” International Journal of Steel Structures , vol. 03, no. 12, pp. 403-417, 09 2012. (SCI)

4.

Jui-Ling Liu, Dung M. Lue, and Wei T. Hsu (2012/08) , “Impact on the Strength of Newly-Placed Concrete-Filled Tube under Earthquake Excitation,” Applied Mechanics and Materias, 08 2012. (EI)

5.

Jui-Ling Liu, Dung M. Lue, and Ping T. Chung (2012/07), “The Application of Light Weight Aggregate Using Reservoir Sediments for Concrete Filled Columns,” Applied Mechanics and Materials, 07 2012. (EI)

6.

Jui-Ling Liu, Dung M. Lue, and Ping T. Chung (2012/06), “Flexural-Torsional Buckling of Double-Angle Compression Members ,” Applied Mechanics and Materials, 06 2012. (EI)

7.

Jui-Ling Liu, Dung M.Lue, Wei T.Hsu (2012/04), “Analysis of Welded Connectons with Eccentrically Applied Loads,” Advanced Science Letters, no. 09, pp. 551-556, 04 2012. (SCI)

8.

Jui-Ling Liu, Dung M Lue, Wei T. Hsu (2012/02), “Evaluation on Sectional Warping Constants of Equal Leg Angle with Lips,” Applied Mechanics and Materials, no. 145, pp. 320-324, 02 2012. (EI)

9.

徐暐亭、曾育英、張倩倩、呂東苗 (2010/12), “螺栓接合之線性與非線性分析,” 鋼結構工程, 中華民國鋼結構協會, no. 40, pp. 70-86, 01 2010.

10.

Dung M. Lue, Ping-Tsung Chung, Jui-Ling Liu, and Chi-Ling Pan (2009/09), “The Compressive Strength of Slender C-shaped Cold-formed Steel Members with Openings,” International Journal of Steel Structures, vol. 03, no. 09, pp. 231-240, 09 2009. (SCI)

11.

Jui-Ling Lin, Dung M. Lue and Ching H. Lin, (2009/01), “The Investigation on Slenderness Ratios of Built-up Compresssion Members,” Journal of Constructional Steel Research , vol. 01, no. 65, pp. 237-248, 01 2009. (EI、SCI)

12.

呂東苗、黃俊賢、徐暐亭, (2007/03), “C形冷軋鋼斷面翹曲常數之數值分析,” 鋼結構工程，中華民國鋼結構協會, no. 26, pp. 69-80, 03 2007.

13.

Dung M. Lue , Jui-Ling Liu, and Tsong Yen (2007/01), “Experimental Study on Rectangular CFT Columns with High-Strength Concrete,” Journal of Constructional Steel Research, vol. 01, no. 63, pp. 37-44, 01 2007. (EI、SCI)

14.

Dung M. Lue, Jui-Ling Liu, and Ching-Hau Lin (2007/12), “ Numerical Evaluation on Warping Constants of General Cold-Formed Steel Open Sections,” International Journal of Steel Structures, vol. 04, no. 07, pp. 297-309, 2007. (SCI)

15.

Dung M. Lue, Jen T. Huang, and Wei T. Hsu, “Numerical Evaluation of Cold-formed C-shaped Sections,” Bulletin of TISC (Taiwan Institute of Steel Construction), vol. 26, pp. 69-80, 2007.

16.

Dung M. Lue, Jui-Ling Liu, and Tsong Yen, “Experimental Study on Rectangular CFT Columns with High-Strength Concrete,” Journal of Constructional Steel Research, 2007. (EI、JCR)

17.

Dung M. Lue, Tson Yen, and Ping C. Chung (2006/01), “Design Investigation of CFT Columns using Normal-Weight and Light-Weight Concrete,” Journal of Civil and Hydraulic Engineering, vol. 5, no. 33, pp. 71-81, 01 2006.

18.

Dung M. Lue, Tsong Yen, and Jui-Ling Liu, “Experimental Investigation on ,” Journal of Constructional Steel Research, pp. 1325-1332, 2006. (EI、JCR)

19.

Dung M. Lu, Rui-Ling Liu, and Ching H. Lin, “Slenderness Investigation of Built-up Steel Columns,” Journal of Engineering, NCHU, vol. 1, no. 16, pp. 1-11, 2005.

20.

Dung M. Lue and Duane S. Ellifritt, “Numerical Evaluation for Warping Constant,” SSRC Proceedings, pp. 213-232, 2003. (EI)

21.

Ten-En Chao, Jin-I Leu, Dung M. Lue, and Yao T. Hsu, “Experimental Investigation on Buckling Strength of Built-up Columns,” vol. 35, 2001.

22.

Dung M. Lue and Chia-Lin Geng, “Bracing Analysis and Design of Steel Structures,” Journal of Civil Engineering Technology, vol. 26, 2000.

23.

Yao T. Hsu and Dung M. Lue, “ Behavior of Curved Steel Bridges,” Journal of Civil Engineering Technology, 1999.

24.

Yao T. Hsu, Chin-Fan Gou, and Dung M. Lue, “Inspection and Maintenance for Bridge Foundations,” Modern Construction of Civil Engineering and Architecture, vol. 222, 1998.

25.

Yao T. Hsu and Dung M. Lue, “Design Requirements for Diaphragm of Curved Steel Box Girders,” Journal of Civil Technology,Taiwan Professional Civil Engineers Association, vol. 1, no. 2, 1998.

26.

Duane S. Ellifritt and Dung M. Lue, “Design of Crane Runway Beam with ,” Engineering Journal, AISC, pp. 41-49, 1998. (EI、JCR)

27.

Yao T. Hsu, Zu-Wen Yang, and Dung M. Lue, (1997/01), “Structural Components of Curved Steel Bridges  Part One,” Modern Construction of Civil Engineering and Architecture, vol. 214, 01 1997.

28.

Yao T. Hsu, Zu-Wen Yang, Dung M. Lue, “Structural Components of Curved Steel Bridges  ,” Modern Construction of Civil Engineering and Architecture, vol. 216, 1997.

29.

Yao T. Hsu, Zu-Wen Yang, Dung M. Lue, “Structural Components of Curved Steel Bridges - Part Two,” Modern Construction of Civil Engineering and Architecture, vol. 215, 1997.

30.

Tony Lue and Duane S. Ellifritt, (1993/03), “The Warping Constant for the W-Section ,” Engineering Journal, AISC, pp. 31-33, 03 1993. (EI、JCR)

31.

Shuaib H. Ahmad and Dung M. Lue, (1987/07), “Flexural-Shear Interaction of Reinforced,” ACI Structural Journal, vol. 4, no. 84, pp. 330-341, 07 1987. (EI、JCR)

1.

劉瑞麟、謝維哲、呂東苗, (2010/12), “Study on Strength of Compression Members based on AISC-2005,” 中華民國第十屆結構工程研討會, pp. 306, 12 2010. 台灣桃園,

2.

劉瑞麟、謝維哲、呂東苗, “Study on Strength of Compression Members based on AISC-2005,” 中華民國第十屆結構工程研討會, pp. 306, 12 2010. 台灣桃園,

3.

劉瑞麟、蔡秉軒、呂東苗, (2010/12), “Analysis and Design of Prying Action Used at Bolted Connections-2005 AISC Specification,” 中華民國第十屆結構工程研討會, pp. 305, 12 2010. 台灣桃園,

4.

劉瑞麟、黃柏儒、呂東苗, (2010/12), “Investigation and Comparison for Column Based Plates Design Based on AISC Specifications,” 中華民國第十屆結構工程研討會, pp. 304, 12 2010. 台灣桃園,

5.

劉瑞麟、曾柏勛、呂東苗, (2010/12), “Investigation and Comparison for Steel Beam Design Based onVarious AISC Specifications,” 中華民國第十屆結構工程研討會, pp. 303, 12 2010. 台灣桃園,

6.

徐暐亭、呂東苗、曾育英、張倩倩, (2010/12), “AISC螺栓接合之線性與非線性分析,” 中華民國第十屆結構工程研討會, pp. 300, 12 2010. 台灣桃園,

7.

徐暐亭、呂東苗、曾育英、張倩倩, “AISC螺栓接合之線性與非線性分析,” 中華民國第十屆結構工程研討會, pp. 300, 12 2010. 台灣桃園,

8.

徐暐亭、呂東苗、張倩倩, (2010/12), “單對稱梁撓曲強度之分析,” 中華民國第十屆結構工程研討會, pp. 299, 12 2010. 台灣桃園,

9.

徐暐亭、呂東苗、張倩倩, “單對稱梁撓曲強度之分析,” 中華民國第十屆結構工程研討會, pp. 299, 12 2010. 台灣桃園,

10.

劉瑞麟、丁冠瑜、呂東苗, (2010/12), “Theory and Design of Beam-Column based on 2005 AISC Specifications,” 中華民國第十屆結構工程研討會, pp. 274, 12 2010. 台灣桃園,

11.

劉瑞麟、丁冠瑜、呂東苗, “Theory and Design of Beam-Column based on 2005 AISC Specifications,” 中華民國第十屆結構工程研討會, pp. 274, 12 2010. 台灣桃園,

12.

劉瑞麟、張鎮宇、呂東苗, (2010/12), “Theory and Practice of Concrete-Filled Tubes Based on 2005 AISC Specification,” 中華民國第十屆結構工程研討會, pp. 273, 12 2010. 台灣桃園,

13.

劉瑞麟、張鎮宇、呂東苗, “Theory and Practice of Concrete-Filled Tubes Based on 2005 AISC Specification,” 中華民國第十屆結構工程研討會, pp. 273, 12 2010. 台灣桃園,

14.

Dung M. Lue, Tson Yen, and Ping T. Chung, “Behavior and Design Considerations of CFT Columns with Normal-Weight and Light-Weight Concrete,” Annual Meeting of Civil and Hydraulic Engineering, 2006. Taiwan,

15.

Jui L. Liu, Ching H. Lin, and Dung M. Lue, “The Buckling Behavior of Built-up T-shaped Sections,” The 8th National Conference on Structural Engineering, 2006. Taiwan,

16.

Jui L. Liu, Guan-I Chen, and Dung M. Lue, “The ACI Design Strength of CFT Columns – Numerical Approach,” The 8th National Conference on Structural Engineering, 2006. Taiwan,

17.

Dung M. Lue, B. T. Hsiao, and J. S. Huang, “Numerical Evaluation on Warping Constant of Cold-formed Steel Open Sections,” The 10th East-Pacific Conference on Structural Engineering and Construction, 2006. Bangkok, Thailand,

18.

Tson Yen, Dung M. Lue, Jui L. Liu, and Ching H. Lin , “Light-Weight Concrete Application in CFT Columns,” The 2nd Conference on Light-Weight Concrete, 2005. Taiwan,

19.

Dung M. Lue, Ping T. Chung, Guan-I Chen, and Jen S. Huang, “The Behavior of CFT Beam-Columns with Light-Weight Concrete,” The 2nd Conference on Light-Weight Concrete, 2005. Taiwan,

20.

Dung M. Lue, Tsong Yen, and Jui-Ling Liu, “Ultimate Capacity of Rectangular CFT Columns with High-Strength Concrete,” The Fourth International Conference on Advances in , 2005. Shanghai, China,

21.

I-Cheng Ding, Jui L. Liu, and Dung M. Lue, “Experimental Investigation of CFT Columns with High-Strength Concrete,” The 7th National Conference on Structural Engineering, 2004. Taiwan,

22.

Jui L. Liu, Ching H. Lin, Ping T. Chung, and Dung M. Lue, “Investigation of Effective Lengths of Built-up Steel Columns,” The 7th National Conference on Structural Engineering, 2004. Taiwan,

23.

Dung M. Lue, B. T. Hsiao, Jui L. Liu, and Jin I. Leu, “Rational Evaluation for Built-up Crane Runway Beams,” The Sixth Sino-Japan Conference for Building Structures, 2004. Hangzhou, China,

24.

Dung M. Lue, Tsong Yen, Jui-Ling Liu, and Yao T. Hsu, “Experimental Investigation for Buckling Strength of Built-up Double-Channel Columns,” The Annual Stability Conference, 2004. (EI) Long Beach, California, USA,

25.

Dung M. Lu, Chung U. Huang, and Jin I. Leu, “Computerized Evaluation for Warping Constant of Irregular Thin-walled Sections,” The 6th National Conference on Structural Engineering, 2002. Taiwan,

26.

Dung M. Lue, Rin-Lin Liu, and Jin-I Leu, “Experimental Verification for Built-Up Compression Members,” The Structural Engineers World Congress, 2002. Yokohama, Japan,

27.

Ten-En Chao, Jui L. Liu, Dung M. Lue, and Yao T. Hsu, “Experimental Buckling Investigation of Built-up Steel Columns,” The 5th National Conference on Structural Engineering, 2000. Taiwan,

1.

Yao T. Hsu and Dung M. Lue, “ Design of Steel Plate Girders,” Kou-Chang Press, Taiwan, 2007.

2.

Yao T. Hsu and Dung M. Lue , “Design of Steel Structures, Vol. 2,” Kou-Chang Press, Taiwa, 2006.

3.

Yao T. Hsu and Dung M. Lue , “Design of Steel Structures, Vol. 1,” Kou-Chang Press, Taiwan, 2005.

4.

Dung M. Lue, “Construction Practice of Steel Structures,” Press of Ministry of Interior, Taiwan, 2000.